|
|
Dishonest Ford Dealers
Posted Tue June 10, 2008 12:00 pm, by Thomas B. written to Ford Motor Company
Write a Letter to this Company | Rate this Company
While on a trip to see my dying mother, the front wheel bearing on my '99 f250 went dry and burned out. I had my truck towed to the Ford dealer in Childress TX (Stanley Ford). After looking at the wheel bearing they decided it was going to cost $3,000.00 to fix. I told them that was unreasonable, and they said doesn't matter that's still the price. I told them I wasn't going to pay that, so they said I had to get it off their lift. The cost for them to get it off their lift and push it into the parking lot was $591.00 for the parts and $187.00 labor. What choice did I have? For $700.00 they pushed it on to the parking lot and left it for 3 days 'till I could rent a trailer and borrow a truck to go get my truck. I was 200 miles from my destination, and I was left with no alternative.
I bought the parts and made the repairs myself for about 1/3 the price they were charging.
I've talked to at least 5 other dealers about the cost of repair of the wheel bearing, and not a single one has even come close to the price at this dealer. I think Ford should better control the cost of parts at their dealers. Every dealer had the same parts at different prices but none as high as the dealer in Childress, Texas. This dealership, I believe, tried to take advantage of me because I was between a rock and a hard place. I was 200 miles from any other help, in a hurry because my 93 year old mother was sick and dying, I had 2 kids with me, with no food or water, and in a desperate situation. They meant to take advantage of my bad situation. Their intent was to charge me 3 times what it should cost. Ford needs to control this or do away with this type of dealer.
Reply
| Log In/Create an account | 9 comments |
|
|
| PlanetFeedback Comments are subject to strict terms and conditions. We reserve the right to deny site membership privileges to any individuals acting inappropriately. |
 |
 |
 |
|
|
by KAREN H. Posted Thu June 12, 2008 @ 12:10 PM
|
|
|
Ford, or any other car maker for that matter, has very little to do with pricing and day to day business that a service department engages in unless the vehicle in question is being serviced under the factory warranty which yours was not. If I were you and really want action call the local I-team investigators in that area or the BBB etc. No dealership wants to find a news crew waiting for them when they get to work and I can concurr that the dealership I work for wouldnt have come close that amount for the repair.
Reply
|
|
 |
|

|
by Donno Posted Wed June 11, 2008 @ 9:49 AM
|
|
|
You didn't provide a lot of details as to what parts were affected, but if they put in $591 in parts, and you put in another $1000 in parts, that leaves roughly $1250 in labor + $160 in tax. What do car dealers charge for labor these days? Let's say $90. That is something like 14 hours.
I was shocked to see the parts cost so much, even when you did it yourself. Obviously on an F250 a wheel bearing is a big deal (on my car I did a hub for $100 in parts and 2 hours or time). Still, 14 hours seems like an awefully long time. It sounds overpriced, but there aren't enough details to say for sure.
Reply
|
|
 |
|
|
|
|
|
|
|
|
|
I mean, wouldn't labor cost more in NYC or Chicago than it would in Cedar Rapids, where the cost of living is significantly lower?
Reply
|
|
|
|

|
|
|
 |
|
|
by Steve-OH Posted Tue June 10, 2008 @ 9:52 PM
|
|
|
when you did it yourself. Please take into consideration that they have overhead (rent, insurance, employee wages,shop supplies, etc.)to cover. That it cost some guy (you) doing the job himself $1000 suggests that the parts alone were expensive and I have to figure it took you some time. Add to that the fact that the dealer would have offered a waranty on the job, and I don't think $3000 is that unreasonable.
I guess you could consider yourself fortunate that you were able to replace the part yourself.
Reply
|
|
 |
|
|
|
 |
|
|